MIKROTIK RouterBOARD LDF 5
You have to log in to shop/see prices.
|
|
MIKROTIK RouterBOARD LDF 5
|
Description
Specifications
The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal.
This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.
Using a dish of up to 100cm in diameter, it is possible to obtain antenna amplification of up to 33dBi. The device comes preinstalled with RouterOS and is ready to use.
| 2.4 GHz | No |
| 5 GHz | Yes |
| Wi-Fi data rate (max) | 54 Mbit/s |
| Ethernet LAN data rates | 10,100 Mbit/s |
| Frequency band | 5.150 - 5.875 GHz |
| Bandwidth | 5 GHz |
| Networking standards | IEEE 802.11a,IEEE 802.11n |
| Auto MDI/MDI-X | Yes |
| Transmitting power | 25 dBmW |
| Ethernet LAN (RJ-45) ports | 1 |
| Power over Ethernet (PoE) | Yes |
| Input voltage | 10 - 28 V |
| Power consumption (typical) | 6 W |
| Product colour | Red,White |
| LED indicators | Yes |
| Internal | No |
| Antenna gain level (max) | 9 dBi |
| Built-in processor | Yes |
| Flash memory | 16 MB |
| Internal memory | 64 MB |
| Operating system installed | RouterOS |
| Operating temperature (T-T) | -40 - 70 °C |
| Width | 84 mm |
| Depth | 115 mm |
| Height | 84 mm |
| AC adapter included | Yes |
| PoE adapter included | Yes |
| Cables included | AC |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.