WIHA Spannungs- und Durchgangsprüfer
You have to log in to shop/see prices.
|
|
WIHA Spannungs- und Durchgangsprüfer
|
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
45217
incl. 2x AAA batteries
Tracks the voltage.
Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of an extensive range from 0.5 V to 1,000 V AC or 1,500 V DC. In addition, the voltage tester can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. Plus, resistance measurements and frequency measurements can also be conducted. Thanks to a large digital LCD display with background illumination and an LED display, the measurement results are immediately readable. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations.
Dimensions
240 x 75 x 30 mm
Measuring category
CAT III up to 1,000 V and CAT IV up to 600 V.
Standard
IEC 61243-3:2014 IP 64. CE certified.
Application
To determine zero voltage. For standardized voltage testing, continuity testing, rotational field testing and resistance testing incl. FI protective switch measurement.
Specifications:
| Order-No. |
45217 |
| EAN |
4010995452179 |
| Battery |
2x AAA batteries |
| Voltage V AC min – max |
0,5 - 1000 |
| Voltage V DC min – max |
0,5 - 1500 |
| Contamination level |
2 |
| Remote voltage test |
Yes |
| ATEX approval |
No |
| Photovoltaic-compatible |
Yes |
| eMobility-compatible |
No |
| Integrated flashlight |
Yes |
| FI check |
Yes |
| Display |
LED and LCD displays |
| Protection class |
IP 64 |
| Rotation field indication |
LED L, R |
| Continuity check |
LED and acoustic tone |
| Operating temperature |
-15°C - 50°C |
| Storage temperature |
-20°C - 60°C |
| Height above sea level |
2000m |
| Single-pole phase test |
100 - 1,000 VAC (40 to 70 Hz) |
| Rotation field test |
170 - 7,000 V phase to phase AC 40-70 Hz |
| Permeability test |
Measuring range 0 - 500 kΩ + 50% |
| LED ELV display |
> 50 V AC, > 120 V DC |
| LCD range |
0,5 V to 1000 V AC, 0,5 V to 1500 V DC |
| LCD resolution |
0,1 V (< 10 V) and 1 V (> 10 V) |
| LCD precision |
+/- 3%, +/- 3 digits (< 10 V) and +/- 3%, +/- 5 digits (> 10 V) |
| LCD overflow display |
OL |
| Inherent time |
< 0,5s LED and < 1s LCD |
| Safety circuit |
< 3,5 mA (at 1,000 V) |
| Measuring mode |
30 s ON (operation time), 240 s OFF (recovery time) |
| Battery consumption |
about 80 mA |
| Humidity |
max 85 % RH |
| Acoustic signal |
Yes |
| Overall length (mm) |
282 |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.