ZALMAN ZM F2 Plus(SF) Indsats med blæser
You have to log in to shop/see prices.
|
|
ZALMAN ZM F2 Plus(SF) Indsats med blæser
-
Type / Purpose
Computer case
-
Fan diameter
9.2cm
|
Description
Specifications
Expert Reviews
ZM-PLUS(SF) F1/F2/F3
120mm/92mm/80mm
Long Life Bearing applied, minimizing noise and inflow of the dust For longer life cycle.
Optimized for maximum airflow, Shark`s Fin blade greatly reduces the turbulence
caused by fan rotation, thus decreasing the noise and vibration while increasing the airflow.
Minimized noise and vibration through lowest rpm. Suitable for silent system environment.
Silicone pin absorbs the vibration between the fan and the case allowing a quiet work environment.
Model. |
ZM-F1 PLUS(SF) |
ZM-F2 PLUS(SF) |
ZM-F3(SF) |
Dimension |
80(L) x 80(W) x 25(H)mm |
92(L) x 92(W) x 25(H)mm |
120(L) x 120(W) x 25(H)mm |
Weight |
83g |
77g |
125g |
Fan Speed |
2,000rpm |
1,500rpm |
1,200rpm |
Noise Level |
20 - 23dBA |
20 - 23dBA |
20 - 23dBA |
Bearing Type |
Long Life Bearing |
Long Life Bearing |
Long Life Bearing |
Rated Voltage |
12V |
12V |
12V |
Life Span |
50,000hrs |
50,000hrs |
50,000hrs |
| Suitable location | Computer case |
| Type | Fan |
| Fan diameter | 9.2 cm |
| Supported processor sockets | Not supported |
| Compatible processor series | Not supported |
| Rotational speed (max) | 1500 RPM |
| Noise level (low speed) | 20 dB |
| Noise level (high speed) | 23 dB |
| Mean time between failures (MTBF) | 50000 h |
| Product colour | Black |
| Material | Plastic |
| Number of fans | 1 fan(s) |
| Voltage | 12 V |
| Width | 92 mm |
| Depth | 25 mm |
| Height | 92 mm |
| Weight | 77 g |
| Bearing technology | Long Life Bearing |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.