KINGSTON n ValueRAM - DDR4 - module - 4 GB - SO-DIMM 260-pin - 2666 MHz / PC4-21300 - CL19 - 1.2 V - unbuffered - non-ECC
Frontpage
Memory
System Memory
KINGSTON n ValueRAM - DDR4 - module - 4 GB - SO-DIMM 260-pin - 2666 MHz / PC4-21300 - CL19 - 1.2 V - unbuffered - non-ECC
You have to log in to shop/see prices.
|
|
KINGSTON n ValueRAM - DDR4 - module - 4 GB - SO-DIMM 260-pin - 2666 MHz / PC4-21300 - CL19 - 1.2 V - unbuffered - non-ECC
-
ECC
No
-
Registered
No
-
Form Factor
SO-DIMM
-
Memory Size
4GB
-
Type
DDR4
-
Kit
No
-
Speed MHz
2.666GHz
|
Description
Specifications
Related products
This document describes ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.
| Buffered memory type | Unregistered (unbuffered) |
| Internal memory | 4 GB |
| Memory layout (modules x size) | 1 x 4 GB |
| Internal memory type | DDR4 |
| Memory data transfer rate | 2666 MT/s |
| Component for | Laptop |
| Memory form factor | 260-pin SO-DIMM |
| ECC | No |
| CAS latency | 19 |
| Memory ranking | 1 |
| Memory voltage | 1.2 V |
| Row cycle time | 45.75 ns |
| Refresh row cycle time | 350 ns |
| Row active time | 32 ns |
| Programming power voltage (VPP) | 2.5 V |
| Country of origin | Taiwan |
| Operating temperature (T-T) | 0 - 85 °C |
| Storage temperature (T-T) | -55 - 100 °C |
| Compliance certificates | RoHS |
| Doesn't contain | Halogen |
| Width | 69.6 mm |
| Depth | 2.45 mm |
| Height | 30 mm |
| Harmonized System (HS) code | 84733020 |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.